| Vessel Rating: | 100 psi @ 82 oC (The normal/maximum operating pressure is for the vessel rating only. Temperature limits vary and depend on pressure and time under load. Practical operating temperature will be dependent on the fluid properties, temperature capability of the filter element and sealing gasket used in the vessel.) |
Hydrostatic Test
Pressure: | 200 psi @ ambient temperature |
| Housing Material: | Multiple cartridge housings: 316L Stainless Steel
Single cartridge housings: 304 Stainless Steel |
| Shell Thickness: | Single cartridge housings:1.5 mm
Three to nine cartridge housings: 3 mm
Twelve or more cartridges housing: 4 mm |
| Pre- and Post-Filter: | 1⁄4 inch NPT ports with inlet and outlet pressure gauges |
| Gauge Ports: | |
| Upstream Vent Port: | 1⁄4 inch NPT with ball valve |
| Drain Port: | 1⁄2 inch NPT with ball valve |
| O-Ring Material: | NBR (Nitryle Butadiene) standard |
| Finish: | Polished stainless steel (acid pickled for optimum corrosion resistance) |
| Filter Connection: | Individual tie rod system for positive seal in DOE cartridges |
| Cartridge Diameter: | Single cartridge housings: from 55 –72 mm outer diameter, 63.5 mm standard Multiple cartridge housings:
from 55 – 70 mm outer diameter, 63.5 mm standard |